I reimage a Firepower 1010 from ASA to FTD in a previous post. In this post, I'll demonstrate how to reimage an FTD appliance to run the classic ASA software. Note in ASA version 9.12 and earlier, only Platform mode (firepower# connect asa) is available while in ASA version 9.13 and later, Appliance mode (ciscoasa>) is the default.
I ran a TFTP server on my laptop using a static IP address 192.168.1.10/24. Below are the steps in the Firepower 1010 FTD to ASA conversion.
C:\Windows\System32>ipconfig
Windows
IP Configuration
Ethernet
adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . :
192.168.1.10
Subnet Mask . . . . . . . . . . . :
255.255.255.0
Default Gateway . . . . . . . . . :
192.168.1.1
C:\Windows\System32>ping
192.168.1.45 // FTD MANAGEMENT IP
Pinging
192.168.1.45 with 32 bytes of data:
Reply
from 192.168.1.45: bytes=32 time<1ms TTL=64
Reply
from 192.168.1.45: bytes=32 time<1ms TTL=64
Reply
from 192.168.1.45: bytes=32 time=1ms TTL=64
Reply
from 192.168.1.45: bytes=32 time<1ms TTL=64
Ping
statistics for 192.168.1.45:
Packets: Sent = 4, Received = 4, Lost = 0
(0% loss),
Approximate
round trip times in milli-seconds:
Minimum = 0ms, Maximum = 1ms, Average = 0ms
Go to
firmware mode using the scope firmware
command.
Download
the ASA package: cisco-asa-fp1k.9.14.1.SPA using the download image <ftp | scp | tftp> command.
>
exit // EXIT FTD CLI
firepower#
scope firmware
firepower
/firmware # download image
tftp://192.168.1.10/cisco-asa-fp1k.9.14.1.SPA
Please
use the command 'show download-task' or 'show download-task detail' to check
download progress.
%
Download-task cisco-asa-fp1k.9.14.1.SPA : transferring
264672 KB
%
Download-task cisco-asa-fp1k.9.14.1.SPA : verifying
image ...
%
Download-task cisco-asa-fp1k.9.14.1.SPA : completed
successfully.
You can
view the download status using the show download-task command (or just monitor
it on the TFTP program).
firepower
/firmware # show download-task
Download
task:
File Name Protocol Server Port Userid State
--------- -------- ---------------
---------- --------------- -----
cisco-asa-fp1k.9.14.1.SPA
Tftp 192.168.1.10 0 Downloaded
View the
downloaded software package using the show
package command.
firepower
/firmware # show package
Name
Package-Vers
---------------------------------------------
------------
cisco-asa-fp1k.9.14.1.SPA 9.14.1
cisco-ftd-fp1k.6.4.0-102.SPA 6.4.0-102
cisco-ftd-fp1k.6.5.0-115.SPA 6.5.0-115
fxos-k9-fp1k.2.6.1.133a.SPA 2.6.1.133a
Before
installing the package, ensure to backup the current FTD software and
configuration.
Go to
auto-install mode using the scope auto-install
command.
Use the install security-pack version command to
install the ASA software package. Just copy the package version (9.14.1) from
the show package output. You'll be asked
to proceed twice (just type: yes).
firepower
/firmware # scope auto-install
firepower
/firmware/auto-install # install security-pack
version 9.14.1
The
system is currently installed with security software package 6.5.0-115, which
has:
- The platform version: 2.7.1.107
- The CSP (ftd) version: 6.5.0.115
If you
proceed with the upgrade 9.14.1, it will do the following:
- upgrade to the new platform version
2.8.1.105
During
the upgrade, the system will be reboot
Do you
want to proceed ? (yes/no):yes
This
operation upgrades firmware and software on Security Platform Components
Here is
the checklist of things that are recommended before starting Auto-Install
(1)
Review current critical/major faults
(2)
Initiate a configuration backup
Do you
want to proceed? (yes/no):yes
Triggered
the install of software package version 9.14.1
Install
started. This will take several minutes.
For
monitoring the upgrade progress, please enter 'show' or 'show detail' command.
firepower
/firmware/auto-install #
You can
use the show or show detail commands to view the Upgrade State.
firepower
/firmware/auto-install # show
Firmware
Auto-Install:
Package-Vers Oper State Upgrade State
------------ ----------------------------
-------------
9.14.1
Scheduled Ready
firepower
/firmware/auto-install # show detail
Firmware
Auto-Install:
Package-Vers: 9.14.1
Oper State: Scheduled
Installation Time: 2020-09-27T08:07:22.583
Upgrade State: Ready
Upgrade Status:
Validation Software Pack Status:
Firmware Upgrade Status:
Current Task: Waiting for Deploy to
begin(FSM-STAGE:sam:dme:FirmwareSystemDe
ploy:WaitForDeploy)
firepower
/firmware/auto-install # show
Firmware
Auto-Install:
Package-Vers Oper State Upgrade State
------------ ----------------------------
-------------
9.14.1
Scheduled Validating Images
firepower
/firmware/auto-install # show
Firmware
Auto-Install:
Package-Vers Oper State Upgrade State
------------ ----------------------------
-------------
9.14.1
Scheduled Upgrading System
The FTD
device will auto reboot.
Brost
message from root@firepower (Sun Sep 27 08:08:58 2020)
Stopping
all devices.
device
busy
Stopping
OpenBSD Secure Shell server: sshd
stopped
/usr/sbin/sshd (pid 12087)
done.
Stopping
Advanced Configuration and Power Interface daemon: stopped /usr/sbin/acpid (pid
1692)
acpid.
Stopping
system message bus: dbus.
stopping
mountd: done
stopping
nfsd: done
Stopping
ntpd: stopped process in pidfile '/var/run/ntp.pid' (pid 12392)
done
Stopping
random number generator daemon.
Stopping
internet superserver: xinetd.
stopping
statd: done
no
/etc/sysconfig/kdump.conf
Stopping
rpcbind daemon...
not
running.
Stopping
fan control daemon: fancontrol... no process in pidfile
'/var/run/fancontrol.pid' found; none killed
done.
Stopping
sensors logging daemon: sensord... stopped /usr/sbin/sensord (pid 3584)
done.
Deconfiguring
network interfaces... done.
ip6tables:
Setting chains to policy ACCEPT: mangle filter [ OK ]
ip6tables:
Flushing firewall rules: [ OK ]
ip6tables:
Unloading modules: [ OK ]
iptables:
Setting chains to policy ACCEPT: mangle filter raw [ OK ]
iptables:
Flushing firewall rules: [ OK ]
iptables:
Unloading modules: [ OK ]
Sun Sep
27 08:09:02 UTC 2020
SSP-Security-Module
is shutting down ...
Sun Sep
27 08:09:02 UTC 2020 SHUTDOWN WARNING: Beginning System Shutdown request for
CSP Apps
Sun Sep
27 08:09:02 UTC 2020 SHUTDOWN WARNING: Continue System Shutdown request for CSP
Apps
/bin/ls:
cannot access /opt/cisco/config/heimdall/etc: No such file or directory
/bin/ls:
cannot access /opt/cisco/csp/applications/configs: No such file or directory
ls:
cannot access /opt/cisco/config/heimdall/etc: No such file or directory
Sun Sep
27 08:09:02 UTC 2020 SHUTDOWN WARNING: Nothing to do for Apps-Services-Down
Sun Sep
27 08:09:02 UTC 2020
FPR-1xxx
platform rebooting ...
Note:
SIGKILL_ALL will be triggered after after 0 + 2 secs ...
2020-09-27
08:09:02 logmonitor[19438]: syslog-ng not running. starting it.
Sun Sep
27 08:09:03 UTC 2020
Sending
ALL processes the KILL signal ...
Sun Sep
27 08:09:04 UTC 2020
Deactivating
swap...
Unmounting
local filesystems...
Rebooting...
[ 3434.905484] reboot: Restarting system
*******************************************************************************
Cisco
System ROMMON, Version 1.0.08, RELEASE SOFTWARE
Copyright
(c) 1994-2019 by Cisco Systems, Inc.
Compiled
Mon 06/17/2019 15:54:21.43 by builder
*******************************************************************************
Current
image running: Boot ROM1
Last
reset cause: ResetRequest (0x00001000)
DIMM0 :
Present
Platform
FPR-1010 with 8192 MBytes of main memory
BIOS has
been successfully locked !!
MAC
Address: 5c:5a:c7:b8:ab:cd
Use BREAK
or ESC to interrupt boot.
Use SPACE
to begin boot immediately.
Located
.boot_string
Image
size 59 inode num 16, bks cnt 1 blk size 8*512
Attempt autoboot: "boot
disk0:installables/switch/fxos-k8-fp1k-lfbff.2.8.1.105.SPA" // FXOS WAS ALSO UPGRADED TO 2.8.1.105
Located
installables/switch/fxos-k8-fp1k-lfbff.2.8.1.105.SPA
Image
size 176340928 inode num 114032, bks cnt 43052 blk size 8*512
######################################################################################
<OUTPUT
TRUNCATED>
######################################################################################
+-------------------------------------------------------------------+
+-------------------------
SUCCESS ---------------------------------+
+-------------------------------------------------------------------+
|
|
| LFBFF signature authentication
passed !!! |
|
|
+-------------------------------------------------------------------+
LFBFF
signature verified.
+-------------------------------------------------------------------+
+-------------------------
SUCCESS ---------------------------------+
+-------------------------------------------------------------------+
|
|
| LFBFF controller type check
passed !!! |
|
|
+-------------------------------------------------------------------+
Linux
version: 4.1.21-WR8.0.0.25_standard (builders@sjc-releng12) #1 SMP Tue Mar 31
15:30:11 PDT 2020
kernel_image
= 0x73beede8, kernel_size=0x5101f0
Image
validated
INIT:
version 2.88 booting
Starting
udev
Configuring
network interfaces... done.
Populating
dev cache
Primary
SSD discovered
fsck from
util-linux 2.26.2
[/sbin/fsck.ext3
(1) -- /dev/sda1] fsck.ext3 -a /dev/sda1
/dev/sda1:
clean, 8885/488640 files, 758402/1953024 blocks
fsck(/dev/sda1)
returned 0
fsck from
util-linux 2.26.2
[/sbin/fsck.ext3
(1) -- /dev/sda2] fsck.ext3 -a /dev/sda2
/dev/sda2:
clean, 12/61056 files, 8242/244224 blocks
fsck(/dev/sda2)
returned 0
fsck from
util-linux 2.26.2
[/sbin/fsck.ext3
(1) -- /dev/sda3] fsck.ext3 -a /dev/sda3
/dev/sda3:
clean, 15/61056 files, 8244/244224 blocks
fsck(/dev/sda3)
returned 0
fsck from
util-linux 2.26.2
[/sbin/fsck.ext3
(1) -- /dev/sda4] fsck.ext3 -a /dev/sda4
/dev/sda4:
clean, 12/1831424 files, 158992/7324160 blocks
fsck(/dev/sda4)
returned 0
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
useradd:
warning: the home directory already exists.
Not
copying any file from skel directory into it.
FIPS POST
Test Script
NOTICE:
The FIPS POST is not run because the FIPS feature is not enabled
Running
postinst /etc/rpm-postinsts/100-dnsmasq...
Running
postinst /etc/rpm-postinsts/101-dnsmasq...
INIT:
Entering runlevel: 3
Starting
system message bus: dbus.
Stopping
all devices.
Starting
all devices.
Processing
/etc/c3xxx_dev0.conf
Checking
status of all devices.
There is
1 QAT acceleration device(s) in the system:
qat_dev0 - type: c3xxx, inst_id: 0,
node_id: 0, bsf: 01:00.0, #accel: 3 #engines: 6 state: up
ip6tables:
Applying firewall rules: [ OK ]
iptables:
Applying firewall rules: [ OK ]
Starting
OpenBSD Secure Shell server: sshd
generating ssh ed25519 key...
done.
Starting
rpcbind daemon...done.
starting
statd: done
Starting
Advanced Configuration and Power Interface daemon: acpid.
acpid:
starting up with netlink and the input layer
acpid: 1
rule loaded
acpid:
waiting for events: event logging is off
starting
8 nfsd kernel threads: done
starting
mountd: done
Starting
ntpd: done
Starting
random number generator daemonUnable to open file: /dev/tpm0
.
Starting
internet superserver: xinetd.
No
makedumpfile found.
Starting
fan control daemon: fancontrol... done.
INFO: in
validating image ...
INFO:
manager_validate_image: fxmgr_absfilename
/mnt/boot/installables/switch/fxos-k9-manager.2.8.1.105.SPA
INFO:
Validating image /mnt/boot/installables/switch/fxos-k9-manager.2.8.1.105.SPA
signature ...
: File
/mnt/boot/installables/switch/fxos-k9-manager.2.8.1.105.SPA size 26031392
Done!
Computed
Hash SHA2:
c0d5986007a5847a62a64e9cc43d5b32
1499d77d422f0136c8bee0838bb634a4
b59c32cc4d07a85c1a68fbb7a01a1b5b
604ed32857c3cbc1643e92ee60e9b4c9
Embedded
Hash SHA2:
c0d5986007a5847a62a64e9cc43d5b32
1499d77d422f0136c8bee0838bb634a4
b59c32cc4d07a85c1a68fbb7a01a1b5b
604ed32857c3cbc1643e92ee60e9b4c9
The
digital signature of the file: fxos-k9-manager.2.8.1.105.SPA verified
successfully
INFO:
beginning of manager_install
INFO:
manager_install:
fxmgr=/mnt/boot/installables/switch/fxos-k9-manager.2.8.1.105.SPA chmgr=
update=false
INFO:
Creating directory /tmp/fxmgr
INFO:
/bin/tar -xvzf /tmp/fxmgr/fxos-kp-manager.2.8.1.105.tgz ...
INFO:
manager_install: shutting down the old version ...
INFO:
Terminating DME and all AGs ...
INFO: --
INFO:
manager_install: Unlinking a old libraries ...
INFO:
manager_install: Deleting the old manager image ...
INFO:
manager_install: Installing the new image ...
INFO:
deleting unnecessary xml file..!!
INFO:
deleted unnecessary xml file..!!
INFO:
manager_post_install ...
INFO:
manager_post_install:
fxmgr=/mnt/boot/installables/switch/fxos-k9-manager.2.8.1.105.SPA chmgr=
update=false
INFO:
manager_post_install: Linking libraries ...
INFO:
manager_post_install: Linking binaries ...
Completed
system initial setup.
INFO:
Trying to add iptables and ip6tables rules ...
INFO: Set
up Application Diagnostic Interface ...
RTNETLINK
answers: Network is unreachable
INFO:
Configure management interface ...
Firepower
1xxx platform..
RTNETLINK
answers: File exists
RTNETLINK
answers: File exists
Assigning
ip to eth0 in FPR-1xxx platform
INFO:
Configure rmu interface ...
Bring up
rmu and swp1-swp10 switch interfaces
create
and bringup lldp sub-interface on lldp-swp7, lldp-swp8
create
and bringup lacp and mgmt sub-interface on (lacp-swp1 to lacp-swp8), (mgmt-swp1
to mgmt-swp8)
Stopping
rpcbind daemon...
done.
stopping
mountd: done
stopping
nfsd: .done
INFO:
Configure system files ...
INFO:
System Name is: firepower-1010
Starting
sensors logging daemon: sensord... done.
INFO:
console : ttyS0, speed : 9600
INFO:
manager_startup: setting up fxmgr apache ...
INFO:
manager_startup: Start manager httpd setup...
INFO:
manager_startup: /opt/cisco/config/certstore/default.key not found on platform,
re-generating files
INFO:
manager_startup: reset httpd app config to default
httpdRegister INFO: [httpd.4011 -4
192.168.45.45 -n localhost]
httpdRegister INFO: Starting httpd
setup/registration...
httpdRegister INFO: Completed httpd
setup/registration!
INFO: httpdRegister [httpd.4011 script exit]
INFO:
manager_startup: Completed manager httpd setup!
Starting
crond: OK
INFO:
System Disk /dev/sda present. Status: Operable.
firepower-1010
login:
Waiting
for Application infrastructure to be ready...
Verifying
the signature of the Application image...
Creating
FXOS swap file ...
Sep 27
08:11:26 firepower-1010 FPRM:
<<%FPRM-2-DEFAULT_INFRA_VERSION_MISSING>>
[F1309][critical][default-infra-version-missing][org-root/fw-infra-pack-default]
Bundle version in firmware package is empty, need to re-install
Sep 27
08:11:30 firepower-1010 port-manager: Alert: Internal1/2 link changed to UP
Sep 27
08:11:30 firepower-1010 port-manager: Alert: Internal1/1 link changed to UP
Cisco ASA: CMD=-install,
CSP-ID=cisco-asa.9.14.1__asa_001_JMX2324G1THQ7VFM51, FLAG=''
Sep 27
08:12:56 firepower-1010 FPRM:
<<%FPRM-2-DEFAULT_INFRA_VERSION_MISSING>>
[F1309][cleared][default-infra-version-missing][org-root/fw-infra-pack-default]
Bundle version in firmware package is empty, need to re-install
Verifying
signature for cisco-asa.9.14.1 ...
Verifying
signature for cisco-asa.9.14.1 ... success
Cisco
ASA: CMD=-start, CSP-ID=cisco-asa.9.14.1__asa_001_JMX2324G1THQ7VFM51, FLAG=''
Cisco ASA
starting ...
ASA start
done pre
ASA Clear
status
Deleting
previous CGroup Configuration ...
Registering
to process manager ...
Cisco ASA started successfully.
IO Memory
Nodes: 1
IO Memory
Per Node: 549453824 bytes num_pages = 134144 page_size = 4096
Global
Reserve Memory Per Node: 786432000 bytes Nodes=1
LCMB: got
1073741824 bytes on numa-id=0, phys=0x200000000, virt=0x7f3480000000
LCMB:
HEAP-CACHE POOL got 784334848 bytes on numa-id=0, virt=0x7f34c9c00000
total_reserved_mem
= 1073741824
total_heapcache_mem
= 784334848
ERROR:
fail to open /var/run/lina/meminfo_new
ERROR:
fail to open /var/run/lina/meminfo_old
total mem
7092699423 system 8327299072 kernel 52874977 image 112961872
new
7092699423 old 662415696 reserve 1858076672 priv new 5287497728 priv old 0
Processor
memory: 7092699423
POST
started...
Compiled
on Wed 01-Apr-20 13:10 PDT by builders
FPR-1010
platformPOST finished, result is 0 (hint: 1 means it failed)
Total
SSMs found: 0
Total
NICs found: 5
x550em_kr
rev 0x11 10 Gigabit Ethernet, index 00 MAC: 00a0.c900.0000
en_vtun
rev00 Backplane Ext-Mgmt Interface @
index 03 MAC: 5c5a.c7b8.f781
en_vtun
rev00 Backplane Tap Interface @ index
04 MAC: 0000.0100.0001
WARNING:
Attribute already exists in the dictionary.
27Sep2020
08:14:14 Read error: Open failed. Error message: No such file or directory.
License
mode file was not found. Assuming this is the initial bootup. Setting the
license mode to Smart Licensing.
INFO:
Unable to read firewall mode from flash
Writing default firewall mode (single)
to flash
INFO:
Unable to read cluster interface-mode from flash
Writing default mode "None"
to flash
*** Intel
QAT Crypto on-board accelerator detected
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
The
3DES/AES algorithms require a Encryption-3DES-AES entitlement.
The
3DES/AES algorithms require a Encryption-3DES-AES entitlement.
Cisco
Adaptive Security Appliance Software Version 9.14(1)
pix_idb_create:
Unable to get link capabilities 3
pix_idb_create:
Unable to get link capabilities 4
****************************** Warning
*******************************
This product contains cryptographic features
and is
subject to United States and local country
laws
governing, import, export, transfer, and use.
Delivery of Cisco cryptographic products does
not
imply third-party authority to import,
export,
distribute, or use encryption. Importers,
exporters,
distributors and users are responsible for
compliance
with U.S. and local country laws. By using
this
product you agree to comply with applicable
laws and
regulations. If you are unable to comply with
U.S.
and local laws, return the enclosed items
immediately.
A summary of U.S. laws governing Cisco
cryptographic
products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please
contact us by
sending email to export@cisco.com.
******************************* Warning
*******************************
Cisco
Adaptive Security Appliance Software, version 9.14
Copyright
(c) 1996-2020 by Cisco Systems, Inc.
For
licenses and notices for open source software used in this product, please
visit
http://www.cisco.com/go/asa-opensource
Restricted Rights Legend
Use,
duplication, or disclosure by the Government is
subject
to restrictions as set forth in subparagraph
(c) of
the Commercial Computer Software - Restricted
Rights
clause at FAR sec. 52.227-19 and subparagraph
(c) (1)
(ii) of the Rights in Technical Data and Computer
Software
clause at DFARS sec. 252.227-7013.
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
RTNETLINK
answers: File exists
RTNETLINK
answers: File exists
config_fetcher:
channel open failed
WARNING:
MIGRATION - no startup configuration or configuration not found.
INFO:
Power-On Self-Test in process.
.......................
INFO:
Power-On Self-Test complete.
INFO:
Starting SW-DRBG health test...
INFO:
SW-DRBG health test passed.
Creating
trustpoint "_SmartCallHome_ServerCA" and installing certificate...
Trustpoint
CA certificate accepted.
INFO:
Security level for "management" set to 0 by default.
INFO:
Security level for "inside" set to 100 by default.
INFO:
Security level for "outside" set to 0 by default.
User
enable_1 logged in to ciscoasa
Logins
over the last 1 days: 1.
Failed
logins since the last login: 0.
firepower-1010
login: admin (automatic login)
Successful
login attempts for user 'admin' : 1
Attaching
to ASA CLI ... Press 'Ctrl+a then d' to detach.
Type help
or '?' for a list of available commands.
The FTD
to ASA conversion completed around 7 minutes. The ASA 9.13 and above defaults
to Appliance mode, which will automatically prompt: ciscoasa>
You'll
initially configure the ASA enable password.
PW:
Admin123
ciscoasa>
enable // I'M ON ASA VERSION 9.14, SO
FTD WILL BOOT IN APPLIANCE MODE
The enable password is not set. Please set it now.
Enter Password: ********
Repeat
Password: ********
Note:
Save your configuration so that the password can be used for FXOS failsafe
access and persists across reboots
("write
memory" or "copy running-config startup-config").
Below is
the default ASA show run config or
output.
ciscoasa#
show run
: Saved
:
: Serial
Number: JAD23211234
:
Hardware: FPR-1010, 6764 MB RAM, CPU
Atom C3000 series 2200 MHz, 1 CPU (4 cores)
:
ASA
Version 9.14(1)
!
hostname
ciscoasa
enable
password ***** pbkdf2
service-module
1 keepalive-timeout 4
service-module
1 keepalive-counter 6
names
no
mac-address auto
!
interface
Vlan1
nameif inside
security-level 100
ip address
192.168.1.1 255.255.255.0
!
interface
Ethernet1/1
no switchport
nameif
outside
security-level 0
ip address
dhcp setroute
!
interface
Ethernet1/2
switchport
!
interface
Ethernet1/3
switchport
!
interface
Ethernet1/4
switchport
!
interface
Ethernet1/5
switchport
!
interface
Ethernet1/6
switchport
!
interface
Ethernet1/7
switchport
!
interface
Ethernet1/8
switchport
!
interface
Management1/1
management-only
nameif management
security-level 100
ip address
192.168.45.1 255.255.255.0
!
ftp mode
passive
dns
domain-lookup outside
dns
server-group DefaultDNS
name-server 208.67.222.222 outside
name-server 208.67.220.220 outside
object network obj_any
subnet
0.0.0.0 0.0.0.0
pager
lines 24
logging
asdm informational
mtu
management 1500
mtu
inside 1500
mtu
outside 1500
icmp
unreachable rate-limit 1 burst-size 1
no asdm
history enable
arp
timeout 14400
no arp
permit-nonconnected
arp
rate-limit 16384
!
object network obj_any
nat
(any,outside) dynamic interface
timeout
xlate 3:00:00
timeout
pat-xlate 0:00:30
timeout
conn 1:00:00 half-closed 0:10:00 udp 0:02:00 sctp 0:02:00 icmp 0:00:02
timeout
sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout
sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout
sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout
tcp-proxy-reassembly 0:01:00
timeout
floating-conn 0:00:00
timeout
conn-holddown 0:00:15
timeout
igp stale-route 0:01:10
user-identity
default-domain LOCAL
aaa
authentication login-history
http
server enable
http
192.168.45.0 255.255.255.0 management
http
192.168.1.0 255.255.255.0 inside
no
snmp-server location
no
snmp-server contact
crypto
ipsec security-association pmtu-aging infinite
crypto ca
trustpoint _SmartCallHome_ServerCA
no validation-usage
crl configure
crypto ca
trustpool policy
auto-import
crypto ca
certificate chain _SmartCallHome_ServerCA
certificate ca 0509
308205b7 3082039f a0030201 02020205
09300d06 092a8648 86f70d01 01050500
3045310b 30090603 55040613 02424d31
19301706 0355040a 13105175 6f566164
6973204c 696d6974 6564311b 30190603
55040313 1251756f 56616469 7320526f
6f742043 41203230 1e170d30 36313132
34313832 3730305a 170d3331 31313234
31383233 33335a30 45310b30 09060355
04061302 424d3119 30170603 55040a13
1051756f 56616469 73204c69 6d697465
64311b30 19060355 04031312 51756f56
61646973 20526f6f 74204341 20323082
0222300d 06092a86 4886f70d 01010105
00038202 0f003082 020a0282 0201009a
18ca4b94 0d002daf 03298af0 0f81c8ae
4c19851d 089fab29 4485f32f 81ad321e
9046bfa3 86261a1e fe7e1c18 3a5c9c60
172a3a74 8333307d 615411cb edabe0e6
d2a27ef5 6b6f18b7 0a0b2dfd e93eef0a
c6b310e9 dcc24617 f85dfda4 daff9e49
5a9ce633 e62496f7 3fba5b2b 1c7a35c2
d667feab 66508b6d 28602bef d760c3c7
93bc8d36 91f37ff8 db1113c4 9c7776c1
aeb7026a 817aa945 83e205e6 b956c194
378f4871 6322ec17 6507958a 4bdf8fc6
5a0ae5b0 e35f5e6b 11ab0cf9 85eb44e9
f80473f2 e9fe5c98 8cf573af 6bb47ecd
d45c022b 4c39e1b2 95952d42 87d7d5b3
9043b76c 13f1dedd f6c4f889 3fd175f5
92c391d5 8a88d090 ecdc6dde 89c26571
968b0d03 fd9cbf5b 16ac92db eafe797c
adebaff7 16cbdbcd 252be51f fb9a9fe2
51cc3a53 0c48e60e bdc9b476 0652e611
13857263 0304e004 362b2019 02e874a7
1fb6c956 66f07525 dc67c10e 616088b3
3ed1a8fc a3da1db0 d1b12354 df44766d
ed41d8c1 b222b653 1cdf351d dca1772a
31e42df5 e5e5dbc8 e0ffe580 d70b63a0
ff33a10f ba2c1515 ea97b3d2 a2b5bef2
8c961e1a 8f1d6ca4 6137b986 7333d797
969e237d 82a44c81 e2a1d1ba 675f9507
a32711ee 16107bbc 454a4cb2 04d2abef
d5fd0c51 ce506a08 31f991da 0c8f645c
03c33a8b 203f6e8d 673d3ad6 fe7d5b88
c95efbcc 61dc8b33 77d34432 35096204
921610d8 9e2747fb 3b21e3f8 eb1d5b02
03010001 a381b030 81ad300f 0603551d
130101ff 04053003 0101ff30 0b060355
1d0f0404 03020106 301d0603 551d0e04
1604141a 8462bc48 4c332504 d4eed0f6
03c41946 d1946b30 6e060355 1d230467
30658014 1a8462bc 484c3325 04d4eed0
f603c419 46d1946b a149a447 3045310b
30090603 55040613 02424d31 19301706
0355040a 13105175 6f566164 6973204c
696d6974 6564311b 30190603 55040313
1251756f 56616469 7320526f 6f742043
41203282 02050930 0d06092a 864886f7
0d010105 05000382 0201003e 0a164d9f
065ba8ae 715d2f05 2f67e613 4583c436
f6f3c026 0c0db547 645df8b4 72c946a5
03182755 89787d76 ea963480 1720dce7
83f88dfc 07b8da5f 4d2e67b2 84fdd944
fc775081 e67cb4c9 0d0b7253 f8760707
4147960c fbe08226 93558cfe 221f6065
7c5fe726 b3f73290 9850d437 7155f692
2178f795 79faf82d 26876656 3077a637
78335210 58ae3f61 8ef26ab1 ef187e4a
5963ca8d a256d5a7 2fbc561f cf39c1e2
fb0aa815 2c7d4d7a 63c66c97 443cd26f
c34a170a f890d257 a21951a5 2d9741da
074fa950 da908d94 46e13ef0 94fd1000
38f53be8 40e1b46e 561a20cc 6f588ded
2e458fd6 e9933fe7 b12cdf3a d6228cdc
84bb226f d0f8e4c6 39e90488 3cc3baeb
557a6d80 9924f56c 01fbf897 b0945beb
fdd26ff1 77680d35 6423acb8 55a103d1
4d4219dc f8755956 a3f9a849 79f8af0e
b911a07c b76aed34 d0b62662 381a870c
f8e8fd2e d3907f07 912a1dd6 7e5c8583
99b03808 3fe95ef9 3507e4c9 626e577f
a75095f7 bac89be6 8ea201c5 d666bf79
61f33c1c e1b9825c 5da0c3e9 d848bd19
a2111419 6eb2861b 683e4837 1a88b75d
965e9cc7 ef276208 e291195c d2f121dd
ba174282 97718153 31a99ff6 7d62bf72
e1a3931d cc8a265a 0938d0ce d70d8016
b478a53a 874c8d8a a5d54697 f22c10b9
bc5422c0 01506943 9ef4b2ef 6df8ecda
f1e3b1ef df918f54 2a0b25c1 2619c452
100565d5 8210eac2 311234
quit
telnet
timeout 5
ssh
stricthostkeycheck
ssh
timeout 5
ssh
version 2
ssh
key-exchange group dh-group14-sha256
console
timeout 0
dhcpd
auto_config outside
!
dhcpd address 192.168.45.10-192.168.45.12 management
dhcpd
enable management
!
dhcpd address 192.168.1.20-192.168.1.254 inside
dhcpd
enable inside
!
threat-detection
basic-threat
threat-detection
statistics access-list
no
threat-detection statistics tcp-intercept
dynamic-access-policy-record
DfltAccessPolicy
!
class-map
inspection_default
match default-inspection-traffic
class-map
class_snmp
match port udp eq 4161
!
!
policy-map
type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
no tcp-inspection
policy-map
global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
class class_snmp
inspect snmp
!
service-policy
global_policy global
prompt
hostname context
call-home
profile License
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination transport-method http
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic
monthly
subscribe-to-alert-group configuration
periodic monthly
subscribe-to-alert-group telemetry periodic
daily
app-agent
heartbeat interval 1000 retry-count 3
Cryptochecksum:feed9fc55c88c5914b85ee6d2112476e
: end
ciscoasa#
show version
Cisco Adaptive Security Appliance Software Version
9.14(1)
SSP
Operating System Version 2.8(1.105)
Device Manager Version 7.14(1)
Compiled
on Wed 01-Apr-20 13:10 PDT by builders
System
image file is
"disk0:/installables/switch/fxos-k8-fp1k-lfbff.2.8.1.105.SPA"
Config
file at boot was "startup-config"
ciscoasa
up 5 mins 57 secs
Hardware: FPR-1010, 6764 MB RAM, CPU Atom C3000 series
2200 MHz, 1 CPU (4 cores)
Encryption
hardware device : Cisco FP Crypto on-board accelerator (revision 0x11)
Driver
version : 4.1.0
Number of
accelerators: 6
1: Int: Internal-Data0/0 : address is 00a0.c900.0000, irq 10
3: Int: Not licensed : irq 0
4: Ext: Management1/1 : address is 5c5a.c7b8.1234, irq 0
5: Int: Internal-Data1/1 : address is 0000.0100.0001, irq 0
License mode: Smart Licensing
Licensed
features for this platform:
Maximum
Physical Interfaces :
Unlimited
Maximum
VLANs : 60
Inside
Hosts :
Unlimited
Failover : Disabled
Encryption-DES : Enabled
Encryption-3DES-AES : Disabled
Security
Contexts : 0
Carrier : Disabled
AnyConnect
Premium Peers : 75
AnyConnect
Essentials : Disabled
Other VPN
Peers : 75
Total VPN
Peers : 75
AnyConnect
for Mobile : Enabled
AnyConnect
for Cisco VPN Phone : Enabled
Advanced
Endpoint Assessment : Enabled
Shared
License :
Disabled
Total TLS
Proxy Sessions : 160
Cluster : Disabled
Serial
Number: JAD23211234
Configuration
register is 0x1
Configuration
last modified by enable_1 at 08:15:18.089 UTC Sun Sep 27 2020
ciscoasa#
show interface ip brief
Interface IP-Address OK? Method Status Protocol
Internal-Data0/0 unassigned YES unset up
up
Vlan1 192.168.1.1 YES CONFIG up up
Ethernet1/1 116.87.123.45 YES
DHCP up up
Ethernet1/2 unassigned YES unset up
up
Ethernet1/3 unassigned YES unset down
down
Ethernet1/4 unassigned YES unset down
down
Ethernet1/5 unassigned YES unset down
down
Ethernet1/6 unassigned YES unset down
down
Ethernet1/7 unassigned YES unset down
down
Ethernet1/8 unassigned YES unset down
down
Internal-Data1/1 169.254.1.1 YES unset up
up
Management1/1 192.168.45.1 YES CONFIG up up
ciscoasa#
show route
Codes: L
- local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O -
OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 -
OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF
external type 2, V - VPN
i - IS-IS, su - IS-IS summary, L1 -
IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate
default, U - per-user static route
o - ODR, P - periodic downloaded static
route, + - replicated route
SI - Static InterVRF
Gateway of last resort is 116.87.123.1 to network
0.0.0.0
S*
0.0.0.0 0.0.0.0 [1/0] via 116.87.123.1, outside // OBTAIN VIA ISP DHCP
C 116.87.128.0 255.255.192.0 is directly
connected, outside
L 116.87.189.193 255.255.255.255 is
directly connected, outside
C 192.168.1.0 255.255.255.0 is directly
connected, inside
L 192.168.1.1 255.255.255.255 is directly
connected, inside
I browsed to Google.com and used the usual ASA show xlate and show conn commands to verify my outbound traffic from my laptop 192.168.1.10/24.
ciscoasa#
show xlate
31 in
use, 36 most used
Flags: D
- DNS, e - extended, I - identity, i - dynamic, r - portmap,
s - static, T - twice, N - net-to-net
ICMP PAT
from any:192.168.1.10/1 to outside:116.87.123.45/1 flags ri idle 0:00:00
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9477 to outside:116.87.123.45/9477 flags ri idle 0:00:31
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9475 to outside:116.87.123.45/9475 flags ri idle 0:00:39
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9471 to outside:116.87.123.45/9471 flags ri idle 0:00:40
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9470 to outside:116.87.1123.45/9470 flags ri idle 0:00:43
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9469 to outside:116.87.123.45/9469 flags ri idle 0:00:43
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9468 to outside:116.87.123.45/9468 flags ri idle 0:00:44
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9467 to outside:116.87.123.45/9467 flags ri idle 0:00:44
timeout 0:00:30
TCP PAT
from any:192.168.1.10/9466 to outside:116.87.123.45/9466 flags ri idle 0:00:44
timeout 0:00:30
<OUTPUT
TRUNCATED>
ciscoasa#
show conn
25 in
use, 37 most used
TCP
outside 54.91.181.41:8027 inside 192.168.1.10:9434, idle 0:01:48, bytes 140,
flags UxO
TCP
outside 172.217.194.94:443 inside 192.168.1.10:9462, idle 0:00:47, bytes 73811,
flags UxIO
TCP
outside 172.217.194.157:443 inside 192.168.1.10:9470, idle 0:00:51, bytes 7013,
flags UxIO
TCP
outside 40.100.29.18:443 inside 192.168.1.10:9402, idle 0:00:09, bytes 14812,
flags UxIO
TCP
outside 52.114.7.87:443 inside 192.168.1.10:9401, idle 0:00:24, bytes 9722,
flags UxIO
UDP
outside 172.20.80.21:161 inside 192.168.1.10:58273, idle 0:00:02, bytes 702,
flags -
TCP
outside 52.113.206.26:443 inside 192.168.1.10:9395, idle 0:00:24, bytes 10647,
flags UxIO
TCP
outside 172.217.160.4:443 inside 192.168.1.10:9461, idle 0:00:51, bytes
330727, flags UxIO
TCP
outside 172.217.194.103:443 inside 192.168.1.10:9460, idle 0:00:53, bytes 5660,
flags UxIO
TCP
outside 74.125.24.84:443 inside 192.168.1.10:9469, idle 0:00:51, bytes 7230,
flags UxIO
TCP
outside 52.98.40.34:443 inside 192.168.1.10:9456, idle 0:00:55, bytes
646550, flags UxIO
<OUTPUT
TRUNCATED>
I wasn't able to initially ping to the Internet so I added the ICMP inspection under the policy-map
global_policy.
C:\Windows\System32>ping
8.8.8.8
Pinging
8.8.8.8 with 32 bytes of data:
Request
timed out.
Request
timed out.
Request
timed out.
Request
timed out.
Ping
statistics for 8.8.8.8:
Packets: Sent = 4, Received = 0, Lost = 4
(100% loss),
ciscoasa#
show run policy-map
!
policy-map
type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
no tcp-inspection
policy-map
global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
class class_snmp
inspect snmp
ciscoasa#
configure terminal
ciscoasa(config)#
*****************************
NOTICE *****************************
Help to
improve the ASA platform by enabling anonymous reporting,
which
allows Cisco to securely receive minimal error and health
information
from the device. To learn more about this feature,
please
visit: http://www.cisco.com/go/smartcall
Would you
like to enable anonymous error reporting to help improve
the
product? [Y]es, [N]o, [A]sk later:
ciscoasa(config)#
policy-map global_policy
ciscoasa(config-pmap)# class inspection_default
ciscoasa(config-pmap-c)#
inspect icmp
ciscoasa(config-pmap-c)#
end
C:\Windows\System32>ping
8.8.8.8
Pinging
8.8.8.8 with 32 bytes of data:
Reply
from 8.8.8.8: bytes=32 time=3ms TTL=117
Reply
from 8.8.8.8: bytes=32 time=3ms TTL=117
Reply
from 8.8.8.8: bytes=32 time=4ms TTL=117
Reply
from 8.8.8.8: bytes=32 time=3ms TTL=117
Ping
statistics for 8.8.8.8:
Packets: Sent = 4, Received = 4, Lost = 0
(0% loss),
Approximate
round trip times in milli-seconds:
Minimum = 3ms, Maximum = 4ms, Average = 3ms
There's no FDM so you'll have to manage the FTD ASA software via the ASDM. I configured a local user for ASDM login.
ciscoasa#
show run http
http
server enable
http
192.168.45.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 inside
ciscoasa#
ciscoasa#
show run username
ciscoasa#
ciscoasa#
configure terminal
ciscoasa(config)#
username cisco password cisco123 privilege 15
I enabled ASA Syslog to view real-time logs by clicking Enable Logging.
Click the License tab to view License features enabeld on the ASA.
Click Firewall Dashboard to view Traffic stats and Access Rule hits.
The Configuration and Monitoring sections are still the same.